Influence of Microstructure and Droplet Volume on Atmospheric Pitting Corrosion of 304L Austenitic Stainless Steel
DOI:
https://doi.org/10.14500/aro.12445Keywords:
Atmospheric pitting corrosion, Austenitic stainless steel, Droplet diameter, Inclusions, MicrostructureAbstract
This research investigates the atmospheric pitting corrosion behavior of 304L austenitic stainless steel subjected to MgCl2 droplets, emphasizing the effects of microstructure and droplet volume. X-ray diffraction and scanning electron microscopy (SEM) show that both austenite and ferrite are present, and it is observed that the ferrite bands dissolved more in the direction the steel is rolled. SEM-energy-dispersive X-ray spectroscopy analysis identified mixed oxides and MnS inclusions. The shape of the pits changed depending on the direction of the plate: Layered pits mostly occurred on the longitudinal–transverse side, while striped pits are seen on the longitudinal–short transverse and short transverse sides, indicating variations in the material’s structure. An increase in droplet volume from 0.5 µL to 2.5 µL led to a linear rise in total pit area and a measurable increase in pit depth. These findings show that the direction of the microstructure and the size of the droplets significantly affect how likely pitting is to occur, which is important for designing and using stainless steels in environments with a lot of chloride.
Downloads
References
Alberth, M., Majoros, L., Kovalecz, G., and Borbas, E., 2006. Bibliography current world literature. Oncology Research, 12, pp.237-241. DOI: https://doi.org/10.1007/BF02893420
ASTM Designation E., 1985. Standard practice for maintaining constant relative humidity by means of aqueous solutions. ASTM Designation E, 10485, pp.790-795.
Brooks, J., Thompson, A., and Williams, J., 1984. A fundamental study of the beneficial effects of delta ferrite in reducing weld cracking. Welding Journal, 63, pp.71S-83S.
Chen, Z., and Kelly, R., 2007. An analytical modeling method for calculating the maximum cathode current deliverable by a circular cathode under atmospheric exposure. WIT Transactions on Engineering Sciences, 54, p.9. DOI: https://doi.org/10.2495/ECOR070041
Cheng, C.Q., Klinkenberg, L.I., Ise, Y., Zhao, J., Tada, E., and Nishikata, A., 2017. Pitting corrosion of sensitised type 304 stainless steel under wet-dry cycling condition. Corrosion Science, 118, pp.217-226. DOI: https://doi.org/10.1016/j.corsci.2017.02.010
Chiba, A., Muto, I., Sugawara, Y., and Hara, N., 2012. A microelectrochemical system for in situ high-resolution optical microscopy: Morphological characteristics of pitting at MnS inclusion in stainless steel. Journal of the Electrochemical Society, 159, p.C341. DOI: https://doi.org/10.1149/2.054208jes
Cruz, R.V., Nishikata, A., and Tsuru, T., 1998. Pitting corrosion mechanism of stainless steels under wet-dry exposure in chloride-containing environments. Corrosion Science, 40, pp.125-139. Donohoe, C., Whillock, G., and Apps, P., 2012. DOI: https://doi.org/10.1016/S0010-938X(97)00124-8
Localized corrosion of stainless steel in a nuclear waste cooling water system-Part 2: Plant inspection findings. Corrosion, 68, pp.844-852. Eguchi, K., 2023. Quantitative analysis of initiation site of pitting corrosion on type 304 austenitic stainless steel. Corrosion Science, 221, p.111312. DOI: https://doi.org/10.1016/j.corsci.2023.111312
Guo, L., Street, S.R., Mohammed-Ali, H.B., Ghahari, M., Mi, N., Glanvill, S., Du Plessis, A., Reinhard, C., Rayment, T., and Davenport, A.J., 2019. The effect of relative humidity change on atmospheric pitting corrosion of stainless steel 304L. Corrosion Science, 150, pp.110-120. DOI: https://doi.org/10.1016/j.corsci.2019.01.033
Helbert, V., Rioual, S., Le Bozec, N., and Thierry, D., 2022. Corrosion behavior of additively manufactured AISI 316L stainless steel under atmospheric conditions. Materials and Corrosion, 73, pp.1833-1843. DOI: https://doi.org/10.1002/maco.202213339
Hu, J., Yang, L., Cao, G., Yun, Y., Yuan, G., Yue, Q., and Shao, G., 2016. On the oxidation behavior of (Zr, Nb) 2Fe under simulated nuclear reactor conditions. Corrosion Science, 112, pp.718-723. DOI: https://doi.org/10.1016/j.corsci.2016.08.006
Hull, F.C., 1967. Effect of delta ferrite on the hot cracking of stainless steel. WELD Journal, 46, p.399.
Ida, N., Nishimoto, M., Muto, I., and Sugawara, Y., 2024. Role of MnS in the intergranular corrosion and depassivation of sensitized Type 304 stainless steel. NPJ Materials Degradation, 8, p.2. DOI: https://doi.org/10.1038/s41529-023-00419-5
Kalpakjian, S., and Schmid, S., 2006. Manufacturing, Engineering and Technology SI 6th Edition-Serope Kalpakjian and Stephen Schmid: Manufacturing, Engineering and Technology, Digital Designs.
Le, D., Ji, W., Kim, J., Jeong, K., and Lee, S., 2008. Effect of antimony on the corrosion behavior of low-alloy steel for flue gas desulfurization system. Corrosion Science, 50, pp.1195-1204. DOI: https://doi.org/10.1016/j.corsci.2007.11.027
Leygraf, C., Graedel, T.E., Tidblad, J., and Wallinder, I.O., 2000. Atmospheric Corrosion. Wiley-Interscience, New York.
Liptáková, T., 2009. Bodová Korózia Nehrdzavejúcich Ocelí (Pitting Corrosion of Stainless Steels).
EDIS, Žilina. Maier, B., and Frankel, G., 2010. Pitting corrosion of bare stainless steel 304 under chloride solution droplets. Journal of The Electrochemical Society, 157, p.C302. DOI: https://doi.org/10.1149/1.3467850
Maier, B., and Frankel, G., 2011. Pitting corrosion of silica-coated type 304 stainless steel under thin electrolyte layers. Corrosion, 67, p.035004-1-035004-10. DOI: https://doi.org/10.5006/1.3560118
Mampuya, M., Umba, M., Mutombo, K., and Olubambi, P., 2021. Effect of heat treatment on the microstructure of duplex stainless steel 2205. Materials Today: Proceedings, 38, pp.1107-1112. DOI: https://doi.org/10.1016/j.matpr.2020.06.196
Manning, P., Duquette, D.J., and Savage, W.F., 1980. The effect of retained ferrite on localized corrosion in duplex 304L stainless steel. Weld Journal, 59, pp.260-262.
Mi, N., 2014. Synchrotron X-ray Studies of Atmospheric Pitting Corrosion of Stainless Steel. University of Birmingham, England.
Mi, N., Ghahari, M., Rayment, T., and Davenport, A.J., 2011. Use of inkjet printing to deposit magnesium chloride salt patterns for investigation of atmospheric corrosion of 304 stainless steel. Corrosion Science, 53, pp.3114-3121. DOI: https://doi.org/10.1016/j.corsci.2011.05.055
Mohammed Ali, H.B., 2016. Atmospheric Pitting Corrosion of Stainless Steel. University of Birmingham, England.
Mohammed-Ali, H.B., 2025. Atmospheric pitting corrosion of TIG welded type 316L austenitic stainless steel under MgCl2 droplets. Corrosion, 81, pp.492-501. DOI: https://doi.org/10.5006/4706
Mohammed-Ali, H.B., Street, S.R., Attallah, M.M., and Davenport, A.J., 2018. Effect of microstructure on the morphology of atmospheric corrosion pits in type 304L stainless steel. Corrosion, 74, pp.1373-1384. DOI: https://doi.org/10.5006/2935
Montoya, T., Katona, R., Karasz, E.K., Taylor, J.M., Snow, J., Bryan, C.R., Kelly, R.G., and Schaller, R.F., 2023. Influence of realistic, cyclic atmospheric cycles on the pitting corrosion of austenitic stainless steels. Journal of The Electrochemical Society, 170, p.041502. DOI: https://doi.org/10.1149/1945-7111/acc42e
Nishimoto, M., Muto, I., and Sugawara, Y., 2023. understanding and controlling the electrochemical properties of sulfide inclusions for improving the pitting corrosion resistance of stainless steels. Materials Transactions, 64, pp.2051-2058. DOI: https://doi.org/10.2320/matertrans.MT-C2023003
Park, J., Matsch, S., and Böhni, H., 2001. Effects of temperature and chloride concentration on pit initiation and early pit growth of stainless steel. Journal of the Electrochemical Society, 149, p.B34. DOI: https://doi.org/10.1149/1.1430415
Ryan, M.P., Williams, D.E., Chater, R.J., Hutton, B.M., and Mcphail, D.S., 2002. Why stainless steel corrodes. Nature, 415, pp.770-774. DOI: https://doi.org/10.1038/415770a
Schindelholz, E., Risteen, B., and Kelly, R., 2014. Effect of relative humidity on corrosion of steel under sea salt aerosol proxies: II. MgCl2, artificial seawater. Journal of The Electrochemical Society, 161, p.C460. DOI: https://doi.org/10.1149/2.0231410jes
Schmuki, P., Hildebrand, H., Friedrich, A., and Virtanen, S., 2005. The composition of the boundary region of MnS inclusions in stainless steel and its relevance in triggering pitting corrosion. Corrosion Science, 47, pp.1239-1250. DOI: https://doi.org/10.1016/j.corsci.2004.05.023
Sedriks, A.J., 1996. Corrosion of Stainless Steels. John Wiley & Sons, United States.
Standard, A., 2005. Standard guide for examination and evaluation of pitting corrosion.
Street, S.R., Cook, A.J., Mohammed-Ali, H.B., Rayment, T., and Davenport, A.J., 2018. The effect of deposition conditions on atmospheric pitting corrosion location under Evans droplets on type 304L stainless steel. Corrosion, 74, pp.520-529. DOI: https://doi.org/10.5006/2614
Street, S.R., Mi, N., Cook, A.J., Mohammed-Ali, H.B., Guo, L., Rayment, T., and Davenport, A.J., 2015. Atmospheric pitting corrosion of 304L stainless steel: The role of highly concentrated chloride solutions. Faraday Discussions, 180, pp.251-265. DOI: https://doi.org/10.1039/C4FD00246F
Tavares, S., Fruchart, D., and Miraglia, S., 2000. A magnetic study of the reversion of martensite α′ in a 304 stainless steel. Journal of Alloys and Compounds, 307, pp.311-317. DOI: https://doi.org/10.1016/S0925-8388(00)00874-4
Tsutsumi, Y., Nishikata, A., and Tsuru, T., 2007. Pitting corrosion mechanism of Type 304 stainless steel under a droplet of chloride solutions. Corrosion Science, 49, pp.1394-1407. DOI: https://doi.org/10.1016/j.corsci.2006.08.016
Van Nam, T., Tada, E., and Nishikata, A., 2015a. Pit initiation and repassivation of stainless steels exposed to cyclic relative humidity changes. Journal of the Electrochemical Society, 162, p.C419. DOI: https://doi.org/10.1149/2.0151509jes
Van Nam, T., Tada, E., and Nishikata, A., 2015b. Pitting corrosion of stainless steel 430 in the presence of thin MgCl2 solution films: Effects of film diameter and thickness. Materials Transactions, 56, pp.1219-1225. DOI: https://doi.org/10.2320/matertrans.M2015099
Wang, Y., Wang, W., Liu, Y., Zhong, L., and Wang, J., 2011. Study of localized corrosion of 304 stainless steel under chloride solution droplets using the wire beam electrode. Corrosion Science, 53, pp.2963-2968. DOI: https://doi.org/10.1016/j.corsci.2011.05.051
Webb, E.G., and Alkire, R.C., 2002a. Pit initiation at single sulfide inclusions in stainless steel: I. Electrochemical microcell measurements. Journal of the Electrochemical Society, 149, p.B272. DOI: https://doi.org/10.1149/1.1474430
Webb, E.G., and Alkire, R.C., 2002b. Pit initiation at single sulfide inclusions in stainless steel: II. Detection of local pH, sulfide, and thiosulfate. Journal of the Electrochemical Society, 149, p.B280. DOI: https://doi.org/10.1149/1.1474431
Williams, D.E., and Zhu, Y.Y., 2000. Explanation for initiation of pitting corrosion of stainless steels at sulfide inclusions. Journal of The Electrochemical Society, 147, p.1763. DOI: https://doi.org/10.1149/1.1393431
Zatkalíková, V., and Markovičová, L., 2019. Corrosion resistance of electropolished AISI 304 stainless steel in dependence of temperature. In: IOP Conference Series: Materials Science and Engineering. IOP Publishing. p.012011. DOI: https://doi.org/10.1088/1757-899X/465/1/012011
Zhang, M.X., Kelly, P., Bekessy, L., and Gates, J., 2000. Determination of retained austenite using an X-ray texture goniometer. Materials Characterization, 45, pp.39-49. DOI: https://doi.org/10.1016/S1044-5803(00)00044-9
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Sarkat R. Hussein, Haval B. Mohammed-Ali
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors who choose to publish their work with Aro agree to the following terms:
-
Authors retain the copyright to their work and grant the journal the right of first publication. The work is simultaneously licensed under a Creative Commons Attribution License [CC BY-NC-SA 4.0]. This license allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
-
Authors have the freedom to enter into separate agreements for the non-exclusive distribution of the journal's published version of the work. This includes options such as posting it to an institutional repository or publishing it in a book, as long as proper acknowledgement is given to its initial publication in this journal.
-
Authors are encouraged to share and post their work online, including in institutional repositories or on their personal websites, both prior to and during the submission process. This practice can lead to productive exchanges and increase the visibility and citation of the published work.
By agreeing to these terms, authors acknowledge the importance of open access and the benefits it brings to the scholarly community.
Accepted 2025-08-24
Published 2025-09-18
ARO Journal is a scientific, peer-reviewed, periodical, and diamond OAJ that has no APC or ASC.