Feasible Time for Extraction of Lead from Spent Paste by Pyrometallurgical Process

Fakhri H. Ibraheem


This paper focuses on determining the feasible time for production of lead from spent paste (SP) by pyrometallurgical process through the rotary furnace. The extraction process faces several problems due to difficulties to control reaction media conditions. The experiments had been done on rotary furnace which exists in a secondary lead smelter in Baghdad - Khan Dhary. The SP mainly consists of lead sulfate and lead oxides. The experiments are implemented at high temperatures (1300°C) for reduction and desulfurization. 20 experiments were designed to determine the feasible smelting cycle time. The weight of slag, matte, and lead bullion was determined in each experiment as well as the percent of lead in each phase. These data were analyzed and graphically represented. The reaction’s rate profile can be detailed in the following manner: (1) High rate during the first 90 smelting min. Low rate from 90 to 120 min. Very low rate after 120 min. (2) The feasible extraction time is between 120 and 130 min with average lead percent in slag not >8%. (3) The slag with lead percent higher than 5% is returned to the furnace whereas the lower one is extracted by the blast furnace.


Secondary lead smelter, Lead, Pyrometallurgical process, Spent past

Full Text:



Alessandra, S., Antunes, A., Filho, I.N., Venquiaruto, L.D., de Oliveira, D., Mossi, A., Di Luccio, M., Treichel, H., and Dallago, R., 2009. Qualitative lead extraction from recycled lead-acid batteries slag. Journal of Hazardous Materials, 172, pp.1677-1680.

Arnout1, D.S., 2011. Thermodynamics of Lead Recycling. Metallurgy Conference, Belgium, p.10.

Benrontol., 2010. Primary Metal Production No. 20051786. Available from: https://www.scribd.com/document/39618162/CM2200-Primary-Metals.

Bill, E.P., Arthur, P., Wang, J., Dong, Y., 2005. ISA-YMG Lead Smelting Process. Proceeding of the International Symposium on Lead and Zinc Processing, Kyoto, Japan.

Brew, R.B.M., Fountain, C., Pritchard, J., 1991. ISASMELt for secondarly lead smelting. s.l. 10th International Lead Conference, United Kingdom, pp.171-180.

Calvo, F.A., 1985. Metal losses in lead blast furnace slag: The influence of the charge and the reducing conditions. Canadian Metallurgical Quarterly, Spain, pp.345-348.

Chemonics International, I., 1999. Technical and Economic Study for Smalland Medium-Sized Lead Smelters. Available from: http://www.pdf.usaid.gov/pdf_docs/Pnacy063.pdf.

Cole, E.R., Lee, A.Y., Paulson, D.L., 1984. Electrolytic method for recovery of lead from scrap batteries. United States Department of the Interior, USA.

Dean, J.A., 1979. Lange’s Handbook of Chemistry. 12th ed. McGraw-Hill, New York.

EPA, 1986. Secondary Lead Processing. U.S. Environmental Protection Agency, Research Triangle Park, USA.

Eric, R., 1989. Thermodynamic analysis of the direct converting of lead sulphide. Journal of the South African Institute of Mining and Metallurgy, 89, pp.33-39.

Habashi, F., 1997. Handbook of Extractive Metallurgy. WILEY-VCH, Canada.

Hawkins, K.R.P., 1993. Lead/acid battery recycling and the new isasmelt process. Journal of Power Sources, 42, pp. 299-313.

Hotea, V., 2013. Clean technology of lead recovery. Applied Economics and Management, 2, pp.263-269.

Iain, T., Ric, M., Smith, GN., 2001. LEAD the Facts. Surrey KT12 4RG. Ian Allan Printing Ltd., Hersham, London UK.

Jaeck, M.L., 1989. Primary and Secondary Lead Processing. Elsevier B.V. All Rights Reserved, Canada, pp.113-118.

Jahahshahi, S., Sun, S., 1992. Studies on the reduction kineticsof metalurgical lead slags. 4th International Symposium on Metallurgical Slags and Fluxes, Tokyo.

Jitka, M., 2016. Recycling of Non-Ferrous Metals. VŠB Technical Universityof Ostrava, Czech Republic.

Kateřina, S., Manoko, L.M.K., 2015. Theory of Production of Non-Ferrous Metals and Alloys. VŠB Technical University of Ostrava, Moravian-Silesian Region, Czech Republic.

Queneau, P.B., Leiby, R., Robinson, R., 2015. Recycling lead and zinc in the United States. World of Metullargy, 3, pp.149-163.

Rabah, M.A., Barakat, M., 2001. Energy saving and pollution control for short rotary furnace in secondary lead smelters. Renewable Energy, 23, pp.561-577.

Seetharaman, S., 2005. Fundamentals of metallurgy. Woodhead Publishing Limited, England.

Tuffrey, N.E., 1989. Pyrometery studies of the combustion of lead concentrate particles under controlled conditions. Ph D Thieses, University of British Colombia, Canada.

United Nations, T.W.G., 2002. Preparation of the Technical Guidelines for the Environmentally Sound Management of Waste Lead-Acid Batteries. United Nations Environment Programme, Geneva.

Vest, D.I.H., 2002. Fundamentals of the Recycling of Lead Acid Batteries. Available from: https://www.energypedia.info/images/7/78/Fundamentals_of_the_Recycling_of_Lead-Acid_Batteries.pdf.

Wright, S., Jahanshahi, S., Errington, W.J., 1994. Reduction kinatics of slags produced from recycling of lead batteries; pyrometallurgy for complex materials and wastes. The Minerals, Metals and Materials Society, 5, pp.121-132.

Wright, S., Lim, H., Rand, J., 1994. An Investigation of the Reduction of Battery Paste (Al2O3-As2O3-CaO-FeO-Fe2O3-PbO-Sb2O3-SiO2) Slags with Graphite. The Minerals, Metals and Materials Society, Warrendale, PA, pp. 11-22.

Yliaho, S., 2016. Distribution of Gallium, Germanium, Indium and Tin between Lead Bullion and Slag. School of Chemical Technology Master’s Thesis for the Degree of Master of Science in Technology. Alato University, Espoo.

Zhang, C., Zahler, R.Z., 2009. Current Status and Outlook on Chinese Secondary lead Industry. International Secondary Lead Conference, Macau.

Zhanga, W., Yang, J., Wu, X., Hu, Y., and Yu, W., 2016. A critical review on secondary lead recycling technology and its prospect. Renewable and Sustainable Energy Reviews, 61, pp.108-122.

Zhi, S., Cao, H., Lin, X., Zhang, X., 2017. Spent lead-acid battery recycling in China a review and sustainable analyses on mass flow of lead. Waste Management, 64, pp.190-201.

DOI: http://dx.doi.org/10.14500/aro.10375
View Counter: Abstract | 61 | and PDF | 15 |

Article Metrics

Metrics Loading ...

Metrics powered by PLOS ALM


  • There are currently no refbacks.

Copyright (c) 2018 Fakhri H. Ibraheem

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.


ARO Journal is an OAJ supported by Koya University, it has no article submission/processing charges (APCs).
© 2018, Koya University is a public University accredited by the Ministry of Higher Education and Scientific Research, KRG - F.R. Iraq.