Design of a Branch-line Microstrip Coupler Using Spirals and Step Impedance Cells for WiMAX Applications

Sayed M. Hosseini, Abbas Rezaei

Abstract


branch-line microstrip coupler is designed and fabricated in this paper. The proposed coupler operates at 3 GHz, which is suitable for WiMAX applications. The designed coupler has a high performance, that is, a low phase difference of 0.49°, low insertion loss, good coupling factor, and good isolation better than −30 dB. Another advantage of the designed coupler is its novel geometrical structure based on integrating the semi-circular and step impedance cells. The design process is based on introducing and analyzing an equivalent LC model to improve impedance matching and reduce losses. To verify the design process, the designed coupler is fabricated, where a good agreement between the simulation result and measurement is achieved.


Keywords


Branch line; Coupler; Insertion loss; Microstrip; Phase shift

Full Text:

PDF

References


Alhalabi, H., Issa, H., Pistono, E. and Kaddour, D., 2018. Miniaturized branch-line coupler based on slow-wave microstrip lines. International Journal of Microwave and Wireless Technologies, 10(10), pp.1103-1106.

Chen, Y. and Yeo, S.P., 2007. A symmetrical four-port microstrip coupler for crossover application. IEEE Transactions on Microwave Theory and Techniques, 55(11), pp.2434-2438.

Dwari, S. and Sanyal, S., 2006. Size reduction and harmonic suppression of microstrip branch-line coupler using defected ground structure. Microwave and Optical Technology Letters, 48(10), pp.1966-1969.

Gholami, M. and Yagoub, M.C.E., 2018. Integrated microstrip-to-waveguide transition with microstrip directional coupler. IEEE Microwave and Wireless Components Letters, 28(5), pp.389-391.

Hosseinkhani, F. and Roshani, S., 2018. A compact branch-line coupler design using low-pass resonators and meandered lines open stubs. Turkish Journal of Electrical Engineering and Computer Sciences, 26, pp.1164-1170.

Jung, Y., 2014. Wideband branch line coupler using symmetrical four-strip interdigitated coupler. Electronics Letters, 50(6), pp.452-454.

Kumar, K., Barik, R. and Karthikeyan, S., 2016. A novel two section branch line coupler employing different transmission line techniques. AEU-International Journal of Electronics and Communications, 70, pp.738-742.

Kumar, K. and Karthikeyan, S., 2015. Wideband three section branch line coupler using triple open complementary split ring resonator and open stubs. AEU-International Journal of Electronics and Communications, 69(10), pp.1412-1416.

Letavin, D., 2019. Miniature microstrip branch line coupler with folded artificial transmission lines. AEU-International Journal of Electronics and Communications, 99, pp.8-13.

Noori, L. and Rezaei, A., 2017a. Design of a microstrip diplexer with a novel structure for WiMAX and wireless applications. AEU-International Journal of Electronics and Communications, 77, pp.18-22.

Noori, L. and Rezaei, A., 2017b. Design of a microstrip dual-frequency diplexer using microstrip cells analysis and coupled lines components. International Journal of Microwave and Wireless Technologies, 9(1), pp.1467-1471.

Noori, L. and Rezaei, A., 2017c. Design of microstrip wide stopband quad-band bandpass filters for multi-service communication systems. AEU-International Journal of Electronics and Communications, 81, pp.136-142.

Rezaei, A. and Noori, L., 2018. Microstrip hybrid coupler with a wide stop-band using symmetric structure for wireless applications. Journal of Microwaves, Optoelectronics and Electromagnetic Applications, 17(1), pp.23-31.

Sa’ad, B., Rahim, S. and Dewan, R., 2013. Compact wide-band branch-line coupler with meander line, cross, and two-step stubs. Microwave and Optical Technology Letters, 55(8), pp.1810-1815.

Sa’ad, B., Rahim, S., Peter, T., Rani, M., Ausordin, S., Zaidel, D. and Krishnan, C., 2014. Transparent branch-line coupler using micro-metal mesh conductive film. IEEE Microwave and Wireless Components Letters, 24(12), pp.857-859.

Salehi, M., Noori, L. and Abiri, E., 2015. Novel tunable branch-line coupler for WLAN applications. Microwave and Optical Technology Letters, 57(5), pp.1081-1084.

Salehi, M. and Noori, L., 2014. Novel 2.4 GHz branch-line coupler using microstrip cells. Microwave and Optical Technology Letters, 56(9), pp.2110- 2113.

Sha, S., Ye, Y. and Zhang, Z., 2019. A novel microstrip branch-line coupler with wide suppression band. Progress in Electromagnetics Research Letters, 83, pp.139-143.

Shukor, N. and Seman, N., 2015. Enhanced design of two-section microstrip-slot branch line coupler with the overlapped λ/4 open circuited lines at ports. Wireless Personal Communications, 88(3), pp.467-478.

Tan, B.K. and Yassin, G., 2017. Planar microstrip coupler with enhanced power coupling. Electronics Letters, 53(1), pp.34-36.

Tsai, K., Yang, H., Chen, J. and Chen, Y., 2014. A miniaturized 3 dB branch-line hybrid coupler with harmonics suppression. IEEE Microwave and Wireless Components Letters, 21(10), pp.537-539.

Wang, Y., Ma, K. and Mou, S., 2016. A compact branch line coupler using substrate integrated suspended line technology. IEEE Microwave and Wireless Components Letters, 26(2), pp.95-97.

Zong, B., Wang, G., Zhang, C. and Wang, Y., 2014. Miniaturised branch-line coupler with ultra-wide high suppression stopband. Electronics Letters, 50(19), pp.1365-1367.




DOI: http://dx.doi.org/10.14500/aro.10606
View Counter: Abstract | 224 | and PDF | 113 |

Article Metrics

Metrics Loading ...

Metrics powered by PLOS ALM

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Sayed M. Hosseini, Abbas Rezaei

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

  
 


ARO Journal is an OAJ supported by Koya University, it has no article submission/processing charges (APCs).
© 2013-2020, Koya University is a public University accredited by the Ministry of Higher Education and Scientific Research, KRG - F.R. Iraq.